Industries · Material handling

Machined plastic parts for material handling & conveyor systems

PHOTO NEEDED: a chain or belt conveyor with CDS-machined UHMW wear strips and chain guides fitted

Wear strips, chain guides, rollers, sprockets and bearings for conveyors in plants, warehouses and distribution centers. Machined from your drawing or the worn part.

Tolerances
±0.002"–±0.005" on critical dimensions
Depending on the plastic
Machining
CNC milling and turning, including complex geometry
From sheet, plate, rod and tube
Quantities
Single replacements to production runs
And repeat orders by part number

Parts by conveyor type

Plastic parts for each type of conveyor

Choose your conveyor to see its plastic parts and where each one sits. If yours isn’t listed, we machine it to your drawing or from the worn part.

For conveyor maintenance

Keeping conveyors running

Replacement wear strips, guides, rollers and drive parts, including parts the conveyor’s maker no longer supplies.

PHOTO NEEDED: a worn UHMW wear strip or chain guide beside the new one CDS machined from it
  • The worn part is enough

    Send the worn strip, guide or roller. We measure it and machine a new one.

    Reverse engineering
  • A full run at once

    Wear strips and guides for a whole conveyor, machined together so every piece matches.

  • When it can’t wait

    Our expedited service gets the replacement machined faster, so the conveyor is back running sooner.

    Expedited service

For OEMs and integrators

Parts for new conveyor builds

±0.002"–±0.005" On critical dimensions, depending on the plastic

  • Prototype to production

    Start with a prototype, then order production quantities for each build.

  • To your drawing

    Machined in the plastic and to the dimensions your drawing specifies.

  • Material certificates

    Certificates and traceability for the material in your parts, on request.

  • Hardware fitted

    Threaded inserts, pins and screws fitted, so parts arrive ready to install.

    Assembly

Plastics

Plastics for conveyor parts

Plastic conveyor parts run without grease, are quieter than metal and don’t rust.

FAQ

Questions about conveyor parts

Yes. We mill them from sheet to the radius and profile on your drawing, or measure them from the worn track.

Yes. We machine conveyor parts from FDA-approved materials for food plants, and from metal and X-ray detectable grades.

Machined in Aurora

Why conveyor teams work with CDS

  • Since 1986

    Specialized in machining engineered plastics for four decades.

  • In-house, with traceability

    Machined and inspected in our Aurora shop, with traceability for the material.

  • Family-owned

    You work directly with the shop that machines your parts.

CDS Plastics building, Aurora, Illinois

Evaluating a supplier? See the shop and how we check the work.

Getting a quote

Send the worn part or the drawing

A worn wear strip or roller, a few photos and measurements, or the drawing. Our experienced team takes it from there.

Analytics preferences

Choose whether to allow additional analytics. Essential services and basic site statistics stay on.

Essential website servicesAlways on
Page delivery, forms, security checks and your saved preferences.
Basic site statisticsAlways on
Cloudflare measures traffic and page performance without analytics cookies.

Forms work with additional analytics turned off. Privacy policy