Value-added service

Assembly services for machined parts

Production batch of machined component assemblies with fitted inserts and circular bores
Machined component assembly with fitted inserts and circular bores
Machined PVC components with fitted Ultem inserts
White UHMW component with three fitted orange O-rings

Photo 1 of 4

We machine the parts, fit the hardware and put them together in our Aurora shop, so your assembly arrives ready to install.

Parts
Plastics and soft metals
Hardware
Standard, off the shelf
Starts from
Drawing or old unit
Quantity
Prototype to production

The hardware

What we fit

Hardware is standard and bought off the shelf. We source it with the job and fit it to your drawing.

Natural acetal components with metal pins fitted into drilled holes
  1. Threaded and helical inserts

    Metal threads set into the plastic, so screws hold firmly and can come out and go back in for service.

    Common on Brackets Housings Standoffs Manifolds

  2. Screws, bolts, nuts and washers

    The pieces fastened together into one unit, at the positions on your drawing.

    Common on Bearing blocks Dividers

  3. Pins and retaining rings

    Dowel pins locate one piece on another. Retaining rings hold parts on a shaft or in a bore.

    Common on Actuator components Pistons

  4. O-rings

    Fitted into their grooves, so the part goes straight into the valve, pump or cylinder.

    Common on Plungers Spools PTFE valve seats

  5. Bearings and bushings

    Pressed into the bore, so rollers and sheaves arrive ready to go on the shaft.

    Common on Rollers Sheaves

Mixed materials

Plastic and metal in one assembly

We machine aluminum, brass and bronze as well as plastics, so one assembly can combine them.

  • Plastic wear faces on aluminum carriers
  • Bronze or brass bushings pressed into plastic parts
  • Machined metal parts assembled on their own
PHOTO NEEDED: a CDS assembly combining a machined plastic part with an aluminum or bronze piece

Why add assembly

Parts only, or assembled

Buying machined parts only compared with buying them assembled by CDS
Parts only Assembled by CDS
Suppliers Machined parts from one, hardware from another One shop, one order
On arrival Inserts, O-rings and fasteners still to fit Ready to install
Fit Fit checked when the pieces come together at your end Every piece machined here to fit the others, to ±0.002"–±0.005" on critical dimensions, depending on the plastic

Getting a quote

Start with what you have

Any one of these is enough to get a quote started.

  • The assembly drawing

    We machine every piece to it and put the assembly together.

    Useful, if you have it

    • Parts list or BOM
    • Hardware callouts
    • Quantity
    Send a drawing
  • The old assembly

    The whole unit or photos of it. We machine the worn pieces and refit new hardware.

    Useful, if you have it

    • Photos of the assembly
    • Which pieces are worn
    • Quantity
    Start from the old assembly
  • One part plus hardware

    A single part with inserts, bushings or O-rings fitted before it ships.

    Useful, if you have it

    • The part drawing or sample
    • The hardware to fit
    • Quantity
    Quote a part with hardware

Buyer questions

Assembly FAQs

Something else? Call (630) 904-2525.

Yes. Fitting threaded inserts, bushings or O-rings into a single part is part of the service, so it arrives ready to use.

Yes. We can build one assembly to check on your equipment, then the production run with the same parts and hardware.

Yes. Use the reorder form with your part number, and it comes back the same as the last order.

Custom machined parts

We machine almost any custom plastic part

Browse parts
  • Dark machined cylindrical body with external threads and multiple ports
  • Grey machined CPVC body with threaded ends and side openings
  • CNC machined plastic part
  • Production batch of black ABS spacers arranged in a tray
  • Black polycarbonate flanged ring fitted with fasteners
  • Natural acetal filter plates with arrays of small drilled holes
  • Black acetal component with turned threads and milled side openings
  • Ertalyte TX machined blocks with channels and recessed fastener pockets
  • Black UHMW nozzle shown intact and in section
  • Black Ultem fitting with a barbed end and threaded connection
  • Polycarbonate flanged rings with threaded inserts
  • White UHMW component with three fitted orange O-rings
  • Box of machined HDPE marine-board panels with circular slots and mounting openings

Expedited service

Equipment waiting
on an assembly?

When an assembly is holding up your equipment, ask about our expedited service. Tell us what it is and the date you need it, and we’ll work through the timing with you.

About expedited service
Call(630) 904-2525

Standard quote

Ready to quote your assembly?

A drawing or the old assembly is enough to start. Experienced help from your first quote to the finished part.

Analytics preferences

Choose whether to allow additional analytics. Essential services and basic site statistics stay on.

Essential website servicesAlways on
Page delivery, forms, security checks and your saved preferences.
Basic site statisticsAlways on
Cloudflare measures traffic and page performance without analytics cookies.

Forms work with additional analytics turned off. Privacy policy